- 03/11/2011
- Retrofit Tri Colour Indicators
- We recently designed and manufactured a run of custom Tri State indicators.
The unit uses an ultrabright LED cluster, replacing the lamps used in the original indicators.
The indicators are used on a 110VAC supply to indicate an actuator valves state; closed (red), open (green) and travelling/mid position (amber).
The operation of this particular unit is switched red or green, and automatically displays yellow when no input is present.
The housing mounts into a 22mm or 31mm panel cutout and connections are made using a screw terminal block.
Due to our custom design and manufacturing capabilities at Jubilee Electronics other options can be easily implemented using the same housing e.g. different supply voltage, choice of colours, steady or flashing indication, type of connector etc.
The indicators pictured were designed for use in a Power Station environment, but can be designed for a wide variety of applications.
Specialising in the Design, Development and Manufacture
of Electronic Systems.
sales@jubilee-electronics.co.uk
+44 (0) 1909 591 612
+44 (0) 1909 591 612
© Copyright Jubilee Electronics Ltd 2010. All Rights Reserved